display on a remote control panel.
QZz
,nnn,ccc
{
cr
}
where z is zone number, nnn
is number of ascending channels to get data
from, starting with
ccc
channel
Returned:
QZz,ccc
,(channel name),(category name),(artist name),(song title),ccc+1,
(channel name),(
cataegory
name),(artist name),(song title),ccc+2,
…..{
cr
}
*
SKz
Skip Channel
This command removes the specified channel number from the universe of channels allowed
when using Up/Down commands. Note that unlike parental blocked
channels
skipped
channels
may still be tuned to directly by their channel number.
The number following the SK is the zone
(
ie
SK1 skips the channel on zone 1). Valid parameters for z are 1,2,3
.
If
SKz
,ccc
{
cr
} is sent, the receiver will skip channel
ccc
for the requested zone z.
*
USz
Unskip
Channel
This command adds the specified channel number to the universe of channels allowed when
using Up/Down commands. Parental blocked channels cannot be added.
The number following
the *US is the zone (
ie
*US1
unskips
the specified channel on zone 1). Valid parameters for z
are 1,2,3
.
If *
USz
,ccc
{
cr
} is sent, the receiver will
unskip
channel
ccc
for the requested zone x.
*
LKz
Lock Channel
This command locks out the specified channel number from the universe of channels allowed
when using Up/Down commands or direct tune commands. This command requires a 4 digit
password that is previously programmed via the front panel or the *PW command. The number
following the *LK is the zone (
ie
*LK1 locks the channel on zone 1). Valid parameters for z are
1,2,3. pppp is the 4 digit password.
If *
LKz
,ccc,pppp
{
cr
} is sent, the receiver will lock channel
ccc
for the requested zone z if the
password pppp
is correct.
Returned
*LKz,ccc,1
{
cr
} if lock is successful
*LKz,ccc,0
{
cr
} if password is incorrect
*
ULz
Unlock Channel
This command unlocks the specified channel number from the universe of channels allowed
when using Up/Down commands or direct tune commands. This command requires a 4 digit
password that is previously programmed via the front panel or the *PW command. The number
following the *UL is the zone (
ie
*UL1 un
locks the channel on zone 1). Valid parameters for z
are 1,2,3
. pppp is the 4 digit password.
If *
ULz
,ccc,pppp
{
cr
} is sent, the receiver will unlock channel
ccc
for the requested zone z if the
password pppp
is correct.
Returned
*ULz,ccc,1
{
cr
} if unlock is successful
} if password is incorrect
3 TriplePlay Multizone Satellite Receiver
http://www.antex.com/support/Web%20Site%20Sirius%20Receiver%20RS232%20control%20spe
(10 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales