*
PR{
cr
}
Queries
the
current powered state of the receiver
Returned
: *
PR0{
cr
}
if unit is off
*
PR1{
cr
}
if unit is on
Zone Specific Commands
*
CHz
Direct Tune Channel Number
-
Query or Set
This command sets or queries the current channel number for each music zone. The number
following the *CH is the zone (
ie
CH1 queries or sets the channel on zone 1). *
CHz
a parameter will query the current channel number for the requested zone. Valid parameters for z
are 1,2,3
. valid
parameter for
ccc
are 001
– 223.
*
CHz
{
cr
}
Queries the current channel number on zone z
Returned:
*
CHz
,ccc,catagory,channel
name,artist
name,song
title{
cr
}
Example: *CH1
,007,Pop,Totally 70’
s,Earth, Wind and
Fire,Can
’t
Hide Love{
cr
}
If
*CHz,ccc{
cr
} is sent, the receiver will change to that channel for the requested zone and
return the above string syntax.
*
CDz
Channel Down (decrement)
This
command decrements the channel for the zone
specified.
For instance, *CD1 will
decrement the audio channel for Zone 1.
If the z
specifier
is not sent it will decrement the
currently active zone. In this way, channels may be changed by a remote controller that does not
keep track of the current channel the receiver is set to.
Note that this command does not tune to
the decremented channel it only returns the following information.
Returned:
*
CDz
,ccc,catagory,channel
name,artist
name,song
title{
cr
}
Example: *CD1
,007,Pop,Totally 70’
s,Earth, Wind and
Fire,Can
’t
Hide Love{
cr
}
The above string will be returned after the selected channel remains stable for one second.
Nothing will be returned with rapid decrements.
Use the *
SLz
command to tune to the channel. The *
SLz
command must be received within 4
seconds of the last *
CDz
command to force a direct tune.
*
CUz
Channel Up (increment)
This command increments
the channel for the zone specified.
For instance, *CU1 will
increment the audio channel for Zone 1.
If the z
specifier
is not sent it will increment the
currently active zone.
In this way, channels may be changed by a remote controller that does
not keep track of the current channel the receiver is set to.
Note that this command does not tune
to the decremented channel it only returns the following information.
3 TriplePlay Multizone Satellite Receiver
http://www.antex.com/support/Web%20Site%20Sirius%20Receiver%20RS232%20control%20spe
(10 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales