Antex electronics TriplePlay Multizone Satellite Audio Receiver Manual de usuario descargar pdf (Pagina 7)

*PPz Preset program command

This command stores a preset for the selected zone.

If *PPz,n{cr} is sent, where n is the preset number 0 – 9, the channel

currently tuned to in the selected zone will be stored as Preset number n .

Returns *PPz,1{cr}{lf} if successful.

*PSz Preset select command

This command selects a preset for the selected zone and tunes to the

channel associated with that preset.

If *PSz,n{cr} is sent, where n is the preset number 0 – 9, the channel in

the selected zone will be changed to the stored channel in preset n.

Returned: *PSz,n,ccc,catagory,channel name,artist name,song

title{cr}{lf}

Returns *PSz,0{cr}{lf} if unable to tune to the channel.

*QZz Query Zone Information

This command dumps all pertinent information about the specified zone

including Channel Name, Category Name, Artist Name, Song or Program

Title. This information may be used for display on a remote control panel.

QZz,ccc,nnn{cr} where z is zone number, nnn is number of ascending

channels to get data from, starting with ccc channel. nnn must less than or

equal to 20. If a number greater than 20 is entered, it will be truncated to

20.

Returned: QZz,ccc,(channel name),(category name),(artist

name),(song title),ccc+1,(channel name),(cataegory name),(artist

name),(song title),ccc+2,…..{cr}{lf}

*SKz Skip Channel

This command removes the specified channel number from the universe of

channels allowed when using Up/Down commands. Note that unlike

parental blocked channels skipped channels may still be tuned to directly

by their channel number. The number following the SK is the zone (ie

SK1 skips the channel on zone 1). Valid parameters for z are 1,2,3.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Antex electronics TriplePlay Multizone Satellite Audio Receiver Manual de usuario Pagina 7